If You Find A Lower Price
We Will Beat It + Give You 10% Of The Difference Or It Is Yours
Lightweight and durable, the
040-0121AC Tublift weighs only 19 pounds, yet is capable
if lifting up to 200 pounds on water pressure as low as 20
PSI. The Tublift uses standard household water pressure to
slowly and steadily lift the patient up to 24 inches and
lower to within five inches of the tub bottom.
Easy and safe operation. Connects to tubs the water spigot
and runs efficiently on water pressure.
360 degree swivel seat makes access easy.
The Hoyer Tub Lift comes complete with both a shower
connection and a spout connection. If the bath has a
shower, you MUST use a shower connection. If there is no
shower, use the spout connection.
Connecting to the tub spout:
Remove the existing spout. Install the provided spout
connection. The Tub Lift supply hose will connect to the
nipple on the underside of the spout.
Connecting to the shower:
Remove the existing shower head and install provided
connection (E) onto the shower pipe. Screw the shower head
back on to the end of the connection. The Tub Lift supply
hose will connect to the side of the connection.
(It is recommended to operate the Tub Lift through a few
up and down cycles to “Bleed” any air from the cylinder.)
Turn on the water.
If Tub lift is connected to the SPOUT: Pull up on the knob
on top of the spout and go to instruction 4.
If Tub lift is connected to the SHOWER: Make sure the
diverter is turned toward the supply hose to the Tub lift.
Turn on the shower as you would before installation and go
to instruction 4.
Turn the valve on the Tub lift to the “UP” position and
the seat will rise.
Turn the control valve to the “DOWN” position and the seat
will slowly descend. You may control the rate of descent
with small valve adjustments.
Lightweight and durable
Weighs only 19 pounds
Water pressure operated
200 lbs wt capacity
Product Weight: 19 lbs.
Product Width: 17.5 in./19.5 in. (from pivot to front edge
Shipping Dimensions (box 1): 26"/ 25"/ 15"
Product Weight Capacity: 200 lbs.
Base Dimensions Width: 17.5 in.
Length: 21 in.
Seat Dimensions: 15.5 in x 15 in
Backrest Height: 15 in.
Range of Seat: 4 to 20 in.