Porch Lift Americas Favorite Wheelchair Lift with a
pound capacity and the ability to lift up to 50
inches the P-Lift-50 can give you back your freedom
providing access to the world as well as to areas
you were never able to gain access to before.
The P-Lift-50 is one of
the quietest products available when installed and
adjusted to factory specifications.
By utilizing an screw design the P-Lift-50
wheelchair lift is inherently safe and you are not
exposed to the safety issues that chain driven lift
are exposed to.
Residential porch lifts
are a simple, affordable solution for creating easy
home access. Even a few steps can be a large barrier
to someone with limited mobility. A P-Lift-50
Residential Wheelchair Lift is designed for indoor
or outdoor use to provide a safer home environment
and a better quality of life.
P-Lift-50 is equipped with a keyed ignition lockout
so individuals & children can not use the lift when
you do not want them using it.
The P-Lift-50 also has a
emergency stop button and a second keyed locking
panel for access to controls.
The P-Lift-50 is the
only porch lift with three target buttons for up
as well as three target buttons for down, this gives
a disabled user a far greater range and ability to
operate the lift themselves without the need of a
aid or 2nd individual to activate the lift.
Constant Pressure Operation – for safety
Up to 850lb weight capacity
8 ft/min travel speed
Total Travel: 50in
Synchronous Geared Belt Drive with Brake
Durable Powder Coated Steel Construction
1 x 110 VAC Single Phase, 15A power required
Platform Size: 34in (Wide) x 54in (Long)
Standard Lift Height
Constant Pressure Platform Control
Emergency Stop Platform Control
Solid with Non-Skid Coating
34" x 54"
Optional Platform Configurations
Same Side Entry-Exit, 90 Degree Adjacent Access
Lift Speed (FPM)
Porch Wheelchair Lift
was designed and engineered for home use.
It's easy to operate easy to install and
virtually maintenance free. Every
safety detail has been carefully designed
into theP-Lift-50 including
a non-slip platform, constant pressure
switches, a low platform for easy
roll-on/roll-off, safety barrier and
railing, and rolled edges.
The P-Lift-50 is a sturdy enough to lift and
lower up to 850 pounds and will accommodate
electric wheelchairs and scooters. Running
on a Threaded Screw rather then a gear box
and chain, the P-Lift-50 will provide a
smooth and quiet up and down ride, requiring
little maintenance. All mechanics are fully
enclosed, yet easy to access through the
rear or front of the housing unit. The
P-Lift-50 completely weatherized and
attractively finished in extremely resilient
& durable Off White Color.
Shipped fully assembled with the exception
of bolting on base, the P-Lift-50 install in
5 easy steps.
The P-Lift-50 Vertical Home Lift is the
economical and practical answer to stair
The Vertical Home Lift P-Lift-50 have a
one year warranty on parts against defects
Powered with a 110 volt AC current, by a
The toggle control switches with a
tamperproof key lock switch are on a low
voltage system, for safe operation
Power drive system is all weather(-30 -
Heavy duty worm drive gear box with heavy
duty Worm Gear (No dangerous
36 inch high side guard rail
Hand crank for manual operation
Adjustable limit switches
Automatic access ramp and roll stop
Non slip platform
Capacity - 850 pounds
Standard lifting height 45 inches.
The Vertical Home Lift P-Lift-50 Uses a
screw rather than a lifting chain. Lifting
chains can be very unreliable where as a
driving screw delivers a smooth reliable
transfer from one level to the next.
P-Lift-50 Vertical Home Liftis one tough, safe, affordable lift.