| |
Handy, Take-Apart Lifts Let You
Stow
Small Scooters in Your Trunk
Take-Apart Lifts - What are they?
These take-apart lifts
(ASL-325/ASL-350) are exceptionally versatile, designed to
help store your scooter in vehicles with smaller trunks.
Connect the lift strap, press a button, and your parially-assembled
scooter is raised or lowered. Lift easily disassembles after
use.
Space-Saver (ASL-325)
•Designed to fit closer to the interior trunk wall,
providing a tighter arc when manually swinging the scooter
in/out of the trunk. This allows scooters to be stored in
spaces that won’t work with more conventional lift designs,
and the rotation of the lift arm makes it possible to
raise/lower the scooter at the rear or side of the vehicle.
•Lightweight - assembly/disassembly can be completed in
three simple steps, quickly and easily.
•Can be stored anywhere - in the trunk or inside the vehicle
itself. And when an additional tower base installation kit
is ordered, the Space-Saver can be used in more than one
vehicle.
•Optional exterior hitch mount available
Offset Space-Saver (ASL-350)
•Features an offset outer arm allowing you to more easily
position your partially assembled scooter inside narrow
trunk openings.
•Ideal for vehicles with trunks that previously were
considered too small for lift installations.
•Designed with a low-profile arm with integral controls.
Just press a button and eliminate the struggle of raising
and lowering your scooter!
•Can be stored anywhere - in the trunk or inside the vehicle
itself. And when an additional tower base installation kit
is ordered, the Offset Space-Saver can be used in more than
one vehicle.
Common to both lifts
•Raises and stores many types of three- or four-wheel
scooters weighing up to 200 lb/ 91 kg.
•Three piece take-apart lift. Heaviest piece weighs 15 lb/7
kg.
•Can be powered by the vehicle's battery or the optional
Bruno Pow'rPac (a self-contained power supply that is
charged through the vehicle's power port). Allows unit
operation even if vehicle battery is inoperable. Recommended
for hybrid vehicles with small accessory batteries.
•Sales, installation and service provided by our
factory-trained worldwide network of dealers
•Bruno Turning Automotive Seating™ (TAS™) complements your
vehicle lift for a total mobility solution
•Up to $1200 is available to help pay for a vehicle lift
through Mobility Reimbursement Programs
To use this lift, the consumer (end
user or attendant)
must be physically able to do the following:
•Walk from the front to the rear of the vehicle and vice
versa.
•Stand for two to three minutes
•Press a button to raise/lower lift strap
•Lean over and connect claw to t-bar on scooter
•Remember a sequence and perform simple lift
assembly/disassembly (three pieces have to be set in place.
Heaviest piece is 14 lb)
•Rotate and guide scooter into/out of vehicle as it is
lowered/raise
Offset-Space-Saver.pdf
|
