lcorner.gif (165 bytes)
     
.

 

 
 
 
 


2,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

These units are tilters that tilt a full ninety (90) degrees. It is common to equip one platform with a "V" cradle to hold coils or rolls. When this is done we leave a gap of 6", or whatever the customer specifies, to accommodate a pallet at the bottom face of the coil or roll. The upender is the called a roll "palletizer" or "depalletizer". Lifts have been mounted on one of the platforms and so have turntables. If a turntable is mounted, it usually has to be mounted on slides so that it can be pulled away from the adjacent perpendicular face in order to turn a square cornered load.


 

 

Model# UE-290

  • Capacity: 2,000 lbs.
  • Lowered Height: 12 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Tilt Speed: 58 sec.
  • Internal Motor: 5 HP
  • Shipping Weight: 2,000 lbs.

 


4,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

These units are tilters that tilt a full ninety (90) degrees. It is common to equip one platform with a "V" cradle to hold coils or rolls. When this is done we leave a gap of 6", or whatever the customer specifies, to accommodate a pallet at the bottom face of the coil or roll. The upender is the called a roll "palletizer" or "depalletizer". Lifts have been mounted on one of the platforms and so have turntables. If a turntable is mounted, it usually has to be mounted on slides so that it can be pulled away from the adjacent perpendicular face in order to turn a square cornered load.


 

 

Model# UE-490

 


6,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

These units are tilters that tilt a full ninety (90) degrees. It is common to equip one platform with a "V" cradle to hold coils or rolls. When this is done we leave a gap of 6", or whatever the customer specifies, to accommodate a pallet at the bottom face of the coil or roll. The upender is the called a roll "palletizer" or "depalletizer". Lifts have been mounted on one of the platforms and so have turntables. If a turntable is mounted, it usually has to be mounted on slides so that it can be pulled away from the adjacent perpendicular face in order to turn a square cornered load.


 

 

Model# UE-690

  • Capacity: 6,000 lbs.
  • Lowered Height: 12 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Tilt Speed: 86 sec.
  • Internal Motor: 5 HP
  • Shipping Weight: 2,500 lbs.

 

 


8,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

These units are tilters that tilt a full ninety (90) degrees. It is common to equip one platform with a "V" cradle to hold coils or rolls. When this is done we leave a gap of 6", or whatever the customer specifies, to accommodate a pallet at the bottom face of the coil or roll. The upender is the called a roll "palletizer" or "depalletizer". Lifts have been mounted on one of the platforms and so have turntables. If a turntable is mounted, it usually has to be mounted on slides so that it can be pulled away from the adjacent perpendicular face in order to turn a square cornered load.


 

 

Model# UE-890

  • Capacity: 8,000 lbs.
  • Lowered Height: 14 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Tilt Speed: 91 sec.
  • Internal Motor: 5 HP
  • Shipping Weight: 4,000 lbs.

 

 


10,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

These units are tilters that tilt a full ninety (90) degrees. It is common to equip one platform with a "V" cradle to hold coils or rolls. When this is done we leave a gap of 6", or whatever the customer specifies, to accommodate a pallet at the bottom face of the coil or roll. The upender is the called a roll "palletizer" or "depalletizer". Lifts have been mounted on one of the platforms and so have turntables. If a turntable is mounted, it usually has to be mounted on slides so that it can be pulled away from the adjacent perpendicular face in order to turn a square cornered load.


 

 

Model# UE-1090

  • Capacity: 10,000 lbs.
  • Lowered Height: 16 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Tilt Speed: 124 sec.
  • Internal Motor: 5 HP
  • Shipping Weight: 4,300 lbs.

 

 

 


2,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty
 

Up-ending, down-ending or positioning steel coils, paper rolls or other types of loads is safe, fast and efficient with this 90 degree hydraulic up-ender because you avoid potentially dangerous hooks, chains and grabs.


 

 

Model# UE-290V

  • Capacity: 2,000 lbs.
  • Lowered Height: 12 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Internal Motor: 5 HP
  • Shipping Weight: 2,000 lbs

 


4,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

Up-ending, down-ending or positioning steel coils, paper rolls or other types of loads is safe, fast and efficient with this 90 degree hydraulic up-ender because you avoid potentially dangerous hooks, chains and grabs.


 

 

Model# UE-490V

  • Capacity: 4,000 lbs.
  • Lowered Height: 12 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Internal Motor: 5 HP
  • Shipping Weight: 2,200 lbs.

 

 


10,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

Up-ending, down-ending or positioning steel coils, paper rolls or other types of loads is safe, fast and efficient with this 90 degree hydraulic up-ender because you avoid potentially dangerous hooks, chains and grabs.


 

 

Model# UE-1090V

  • Capacity: 10,000 lbs.
  • Lowered Height: 12 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Internal Motor: 5 HP
  • Shipping Weight: 10,000 lbs.

 

 

Special Features and Benefits

  • All models have hydraulic return lines on the cylinders to preclude oil weepage.
  • The controllers are assembled in our U.L. approved panel shop.
  • All shafts, axles and pins are hard chrome plated.
  • All bearings are lifetime lubricated.
  • These units are fully primed and finished with baked enamel.

 


 

Feature Details
 

UL Approved
Controller
Cylinder
Double Wire
Braid Hose
Power Unit

 

 

 

 

 

 

 

 


 

Home Shipping Contact Us Terms Classifieds FAQ
Air Mattress Bathroom Bathroom Lifts Beds Bikes Ceiling Lifts
Door Openers Driving Aids Handicap Fitness Lift Chairs Man Wheelchairs Patient Lifts
Phones Pool Lifts Pool Steps Pwr Wheelchairs Ramps Scooters
Scooter-lifts Stairway Lifts Standing Wheelchair Lifts    
           
 

 

 

 
 
 
 
 
 
 
 

Resource Links

 
 
 
 
 



Connected With

 

 

Copyright 2011 Discover My Mobility All Rights Reserved