| |
|
 |
|
A Motorcycle/Scooter aluminum
carrier that hitches to a frame-mounted 2" class III or
better receiver hitch. Now with an integrated "load assist
wheel chock" and an Extended Ramp. The value of a
Tilt-A-Rack! Check our competition and you will agree that
our value is unmatched! For your convenience and security
you can purchase now through our own Shopping Cart. The
410ACR carriers weigh only 60 lbs., has a load capacity of
400 lbs with a wheel channel that is 72" long X 6" wide
and an integrated wheel chock. Designed for most dirt
bikes, mopeds, small motorcycles and scooters. |
| |
|
| A 1-place tilt-able Motorcycle
carrier that hitches to a frame-mounted 2" class III or
better receiver hitch. Now with an integrated
"load assist wheel chock" included. These
carriers are designed for transporting a wide range of
MotoCross, Enduro, and other off-road bikes, all the way
from the small pocket bikes to the big scramblers up in
the 600 lb. range. |
|
 |
 |
The 210ACR
weighs only 51 lbs., has a load capacity of 200
lbs with a wheel channel of 60" long X 6" wide.
The 410ACR weighs only 60 lbs., has a
load capacity of 400 lbs with a wheel channel of 72" long
X 6" wide.
The 610ACR weighs only 71 lbs., has a
load capacity of 600 lbs with a wheel channel is 84" long
x 8" wide.
|
| Intended for
600cc or below.
These carriers allow you to carry your Motorcycle behind
the smaller space used by sports vehicles because they are
very light. They are also very EASY to use. With the
Aluminum construction you get: long
lasting quality, ease of use and a great looking carrier
behind your vehicle! You will hardly realize it is back
there.
|
 |
 |
Requires a
2" frame mounted, class III receiver
-
Just hook up the 410ACR to your
2" receiver hitch, pull out the extension, and unlatch
the tilt.
-
Push the Motorcycle up the rack,
and the rack latches level.
-
Tie it down, push in the
extension, and you're ready to go! (While the other
guys are still trying to maneuver their trailers and
pulling out the ramps).
|
NO MORE:
-
Cramped pick-up beds
-
Dealing with dangerous ramps
-
Backing and maneuvering trailers
-
Fixing flats
-
Buying trailer tires
-
Changing or repacking wheel
bearings
-
Registration and licensing small
trailers
-
Driving at reduced speed on
highways
-
Hauling dirty loads in your
vehicle
|
 |
410ACR - Dirt Bike Tilt-a-Rack
The Tilt-a-Rack ATV and Quad
Carrier features the following versatile attributes:
These tilting atv carriers can be
customized to fit your needs perfectly. We offer a complete line
of accessories for the Tilt-a-Rack ATV rack including tie down
packages, weatherproof covers, specially designed silent hitch
pins, deck covers, height adjusters to adjust the carrier higher
or lower and a bogie wheel kit that attaches to the rack and
allows a single person to maneuver the atv rack with ease. We
Strongly recommend the use of the "Silent hitch Pin" for all
tilting ATV racks.
A 1-place tilt-able Motorcycle carrier
that hitches to a frame-mounted 2" class III receiver hitch.
They are designed for transporting a wide range of MotoCross,
Enduro, and other off-road bikes, all the way from pocket
bikes (est. 54 lbs) to the big scramblers up in the 400 lb.
range. The wheel channel is 6' long x 5" wide. These racks
allows you to carry your Motorcycle behind the smaller space
used by sports vehicles because they are very light. You
hardly realize it is back there.
|
Tilt-A-Rack ACR |
|
|
|
