| |

(Designed To Fit Virtually Any Vehicle,
Car, Truck, Van Or Suv)
| The Craftsmen (2)
In (1)
550 Carrier's loading ramp is 28 1/4" wide by 60" long
providing a gradual slope for easy loading of your scooter
or wheelchair. A solid position handle on the ramp allows
for easy folding and unfolding and tie down straps are
included with rubber coated hooks which can be hooked onto
any of the 10 tie down holes featured on the 4 1/4" tall
ramp sides. The ramp is easily attached even after the
carrier has been attached to the vehicle making the
installation very easy. The rear of the carrier has 2
reflectors for greater visibility at night.
|
 |
|
 |
The Craftsmen (2)
In (1)
550 Carrier
wheelchair and scooter carrier features a 2 section
ramp that folds up and out into 3 different
positions. The first position keeps the ramp folded
flat to the carrier surface and held down with a
spring pull pin. The folded flat position is to keep
the ramp self stored and secured when the carrier is
folded up. The second ramp position allows the ramp
to stand upright when a scooter or wheelchair is on
the carrier. The ramp is held vertically in place
with a spring pull pin. The last position is the
ramp unfolded. This position allows for scooters or
power wheelchairs to be pushed or driven up the
ramp. Please Note: Your Scooter or
Wheelchair must be unoccupied when loading the
Craftsmen (2)
In (1)
550 Carrier. |
| The
Craftsmen (2)
In (1)
550 Carrier folds easily with a simple pull of a
hitch pin and unlike most can be parked with the
simple pull of hand plunger. This feature allow you
to save space when parking in car ports, garages, or
parking lots! The Craftsmen (2)
In (1)
550 Carrier has a heavy duty weight capacity of 550
Pounds and is constructed of a high grade steel with
a superior powder coat finish to protect it from the
elements. |
 |
| |
|
|
 |
The photo to the left show the
simple action of the
pull handle positioned in a
easy location allowing the
Craftsmen (2)
In (1)
550 Carrier to
simply fold upright flush against the vehicle as
shown in the photo above. |
| |
|
|
The Photo To The Right Shows The Gear And
Plunger. This Is The Key That Makes The
Craftsmen (2)
In (1)
550 Carrier
So
Simple To Use. The Gear & Plunger Provides An Easy
Smooth Lift When Folding It
Flat Against The Vehicle. This Plunger Also Removes
Any Space, Gaps And Play That Most All Other
Carriers And Trailers Would Normally Experience. |
 |
| |
|
|
 |
The
Craftsmen (2)
In (1)
550 Carrier
is equipped with spring loaded quick locking pin
lock's for locking the loading ramp into its three
different positions.
The surface of the Craftsmen (2)
In (1)
550 Carrier is a heavy duty steel mesh with 1"
square support tubes underneath that will not bend
or flex from the weight of your scooter or
wheelchair. The Craftsmen (2)
In (1)
550 Carrier is built with the highest quality
material resulting in the highest quality carrier
for hauling your expensive mobility scooter /
wheelchair. |
| |
|
| The
Craftsmen (2)
In (1)
550 Carrier
is made from a strong lightweight alloy and has a
durable exterior finish that resists scratches and
corrosion. This structure also offers a amazing 550
pound weight capacity, that is more than five times
the weight of the
Craftsmen (2)
In (1)
550 Carrier. |
 |
| |
|
| |
|
|
 |
|
(Set Of
Four) Quick Set Ratchet Tie Downs
Free.
The Craftsmen (2)
In (1)
550 comes standard with A (Set Of Four) Quick Set
Ratchet Tie Downs that have a capacity of 2,000
Pounds. The Quick Ratchet Feature allows you to
secure your scooter/wheelchair in just seconds.
There is also a instant quick release lever that
removes all tension instantly when you are ready to
use or remove your scooter/wheelchair off the
Craftsmen (2)
In (1)
550. |
| |
|
| All Weather
Heavy Duty Durable Nylon Cover.
The
Craftsmen (2)
In (1)
550 also comes
with a All Weather Heavy Duty Nylon Cover that is
available in small, medium & large. This cover
protects your Scooter / Wheelchair from Rain, Snow,
Road Objects and even the Hot Sun. The large would
be for large 3 & 4 wheel scooters. Rarely would you
select the Large for a wheelchair although if you
should have an abnormally large wheelchair then the
large size would be appropriate. The medium is the
most common use for most all power wheelchairs and
mid size scooters. The small is strictly for
lightweight small portable scooters. |
 |
|
| |
| |
|
 |
| |
|
|
 |
|
Lifting Capacity |
550 lbs. |
|
Max. scooter width |
28." |
|
Max. scooter wheelbase |
44" |
|
Installed weight |
85 lbs. |
|
Hitch Height (range) |
5" - 19" |
|
Hitch Class |
II or III |
|
|
|
|
 |
AL100-Brouchier |
|
|
|
|
Supporting the carrier is the heavy duty 2" hitch tube
which features 4 bolts and a safety pin underneath to
allow the hitch tube to be removed from the carrier. The
hitch tube has a 5/8" hitch pin hole for securing the
carrier to your vehicle and will work on class I, II, III,
or IV hitches. A bolt fitted underneath the
folding hitch tube allows you to level the carrier so that
the pin holes line up to secure the carrier in the
unfolded position. The distance between the hitch pin hole
and the carrier is 13 7/8" unfolded and when the carrier
is folded the distance is 4 3/4". |
| |
| |
|
|
 |
| |
|
|
 |
-
60 in. center folding ramp.
-
Ramp folds up and down
easily.
-
Ramp folds flat position when
not in use.
-
Ramp can be removed.
-
Carrier tilts up when not in
use.
- Includes both class II and
class III hitch.
- 14 slots for tie down
straps
- Tough powder coat finish
- Tray 49 1/8 in. x 28 1/8
in. of carrying area.
|
| |
|
|
The
Craftsmen (2)
In (1)
550 Carrier
is easy to
use and flexible. Most all Lifts, Carriers and Ramps are
limited to the class of hitch it was meant to attach to.
The
Craftsmen (2)
In (1)
550 Carrier
Allows you the flexibility to attach to any and all
hitch's. Class II Or A Class III
hitch. This now allows users to move the carrier from
one vehicle to another freely without the concern of
compatibility.
|
|
|
|
------------------------------------------------------------------------------
 |
|
|
| 30 Day Money Back Guarantee.!
|
|
Use
the
"Craftsmen
(2)
In (1)
550 Carrier"
for A Full Thirty Days Risk Free! If
it is not everything you expected or it is simply not
meeting your needs, simply return your Craftsmen (2)
In (1)
550 Carrier within thirty days and you will receive a
"FULL REFUND".
You will not pay any restocking fee or any outbound
shipping charges...! |
550-Instalation-Instructions
|
Craftsmen (2)
In (1)
Scooter/Wheelchair Carrier |
|
|
| |
|