lcorner.gif (165 bytes)
ctp90.gif (923 bytes)      
.

 

 
 
 
 

 

Lift that Big, Powered Wheelchair with
Bruno's Flexible Big Lifter


Big Lifter - What is it?
This easy to use product lifts and stores your unoccupied scooter or power-chair inside your vehicle at the touch of a button. Simply connect the docking device, push a button on the hand-held pendant, and let your VSL-570 do the heavy lifting for you! Once lifted to the proper height, the lift is then manually rotated.
   
•Power raise/lower - Makes lifting your scooter or power-chair virtually effortless (400 lbs/181 kg lifting capacity)
•Manual rotation - low resistance design glides smoothly
•Upgradeable to power rotate function - if your needs change down the road, this lift can be converted from manual to power rotate
•Offset Arm Design - Allows lifting/lowering behind, at the rear corner of, or on the side of the vehicle (near the rear wheel)
•Fold-down Lift Head allows partial third row seating access (where applicable) or cargo space and improved driver visibility when mobility device is not present (requires optional quick release pins)
•Available for passenger or driver side of vehicle
•Bruno’s Back-Off™ backrest removal device allows someone to lift off the backrest part of the mobility device seat, allowing it to fit into shorter vehicle openings without having to remove the entire seat! Available for many different scooters and power-chairs.
 
 
   



 
•Can be powered by the vehicle's battery or the optional Bruno Pow'rPac (a self-contained power supply that is charged through the vehicle's power port). Allows unit operation even if vehicle battery is inoperable. Recommended for hybrid vehicles with small accessory batteries.
•Docking device for your mobility device is included at no charge
•Available for passenger or driver side of vehicle
•Safe/Reliable - lifecycle and strength tested beyond industry standards
•No structural modifications to your vehicle - can be easily removed for vehicle resale
•Can reinstall on your next vehicle
•Works with minivans, SUVs, crossovers, pickup trucks and full-size vans (check with your local Bruno dealer to confirm compatibility with your vehicle)
•Hundreds of custom, vehicle-specific mounting kits are available for an extra clean and precise installation
•Sales, installation and service provided by our factory-trained worldwide network of dealers
•Bruno Turning Automotive Seating™ (TAS™) complements your vehicle lift for a total mobility solution
•Up to $1200 is available to help pay for a vehicle lift through Mobility Reimbursement Programs.
   


Important Note: Confirm all applications with an authorized Bruno dealer


To use this lift, the consumer (end user or attendant)
must be physically able to do the following:
Walk from the front to the rear of the vehicle and vice versa. Stand for two to three minutes. Have adequate balance and strength to attach the docking device. This may require bending over and reaching downward as well as having good hand dexterity Hold down a button on a hand-held pendant to raise/lower the lift strap, then guide the mobility device as you manually rotate the lift in/out of the vehicle. Fold down the seat back and/or tiller of the mobility device, or remove the seat back using the Back-Off device, if applicable. In vehicles with limited opening height such as SUVs or where the seat back is higher than the vehicle opening height, the customer must be able to remove the mobility device seat or use a seat assist option (if available). If using the fold-down lift head option, have the ability to remove/install a quick release pin and raise/lower the lift head (requires 7 lb of force)

 

To use this lift, the consumer (end user or attendant)
must be physically able to do the following:

  • Walk from the front to the rear of the vehicle and vice versa.
  • Stand for two to three minutes.
  • Have adequate balance and strength to attach the docking device. This may require bending over and reaching downward as well as having good hand dexterity
  • Hold down a button on a hand-held pendant to raise/lower the lift strap, then guide the mobility device as you manually rotate the lift in/out of the vehicle.
  • Fold down the seat back and/or tiller of the mobility device, or remove the seat back using the Back-Off device, if applicable.
  • In vehicles with limited opening height such as SUVs or where the seat back is higher than the vehicle opening height, the customer must be able to remove the mobility device seat or use a seat assist option (if available).
  • If using the fold-down lift head option, have the ability to remove/install a quick release pin and raise/lower the lift head (requires 7 lb of force)

Big-Lifter-Scooter-Lift Broacher



 

 

 


 

Home Shipping Contact Us Terms Classifieds FAQ
Air Mattress Bathroom Bathroom Lifts Beds Bikes Ceiling Lifts
Door Openers Driving Aids Handicap Fitness Lift Chairs Man Wheelchairs Patient Lifts
Phones Pool Lifts Pool Steps Pwr Wheelchairs Ramps Scooters
Stairway Lifts Standing Wheelchair Lifts      
           
 
 
 

 
 
 
 
 
 
 
 

Resource Links

 
 
 

 

 



Connected With

 
.....

© Copyright 2011 Discover My Mobility All Rights Reserved